Correcting Sequencing Issues With Dual Air Assist in LightBurn

You are here:
← All Topics


For you guys with Dual Stage Air Assist running LightBurn: It was brought to our attention that the Cut and Engrave modes for Air Assist Control can get out of sequence if connected to your machine via USB Serial. If your machine exhibits this anomaly, you need to try selecting USB Packet method in the LightBurn Device Settings. If you are connected via ethernet or if you selected USB Packets instead of USB Serial as the communication method during setup you can disregard this. Thanks to Adam M. Haile for the discovery of this as well as the resolution. Another reason we love our Thunder Laser family!

Our Machines