(903) 522-4070
Support
Odin 22
$9,700
as low as $88/mo
NEW for 2020! The Odin 22 is a compact, high-quality engraving and cutting machine. With 3G acceleration and 80 IPS (2,000mm/sec) engraving speed, this Metal RF Tube engraver affords super-fast engraving in an industrial-grade machine at an astounding value!. The air-cooled RF tube allows a fantastic beam signature and you don’t have to worry about freezing. The gantry payload is minimal and is super smooth even with the amazing acceleration and deceleration. USE COUPON CODE “EARLYBIRD” to receive an additional $1000 off!!(Only 20 codes available).
Questions? Call (903) 522-4070
I bought a Nova 35 a year ago and am very pleased with the purchase! What I am most impressed about is first the Machine build. Everything arrived as it should have, packaged very well. The other thing that has impressed me is that any question I have had has been answered quickly and handled professionally. Clay has been amazing and a pleasure to do business with! As soon as my business has the need I will be buying another Thunderlaser!
-
Del P. Purchased a Nova 35
Del P. Get a better look at a Thunder Laser
Check out this review from one of our customers to go over some of the main features and highlights of a Thunder Laser.
US-Based Support and Service
We aren't just selling you a machine, but entering a long-term relationship. We stand behind our products 100%
ThunderCam System
Optional camera system to visually render the laser bed in the software
Hybrid-Servo Motors
Our LeadShine HBS57 Closed-Loop stepper motors are capable of engraving speeds up to 39" per second
Pass-Through Doors
Allowing you to work with pieces large than the size of the bed
Alarm Lamp
Visually alerted when the job is finished running
Smart Board
Turns the exhaust system on and off automatically so you are not wasting precious HVAC
- Water Chiller
- Air Assist
- Exhaust
- 2" Head
- LightBurn
- Tool Kit
- Cleaning Kit
- Honeycomb / Knife Bed
- Pass-through Doors
- Alarm Lamp
- Smart Board
- Red Dot Pointer
- Auto Focus
Features
- Engraving / Working Area 22" x 15" x 8.2"
- Max Part Size 24.6" x 17.3"
- Laser Wattage 30w
- Intelligent Memory Capacity Multiple File Storage up to 128MB
- Laser Source Air-Cooled Radio Frequencey Metal Tube
- Electrical Requirements Standard 110v AC 60Hz Single Phase, dedicated 15A circuit
- Air Assist Air pump 5-7psi included
- Machine Size 40" x 34" x 43"
- Software LightBurn Software included for two computers, easily import any graphics file. Compatible with Windows, Mac, and Linux
- Training One hour remote setup training included, optional four hour training available
- Red Dot Pointer Shows where laser will fire, allows for "dry run", allows for easy positioning on material
- Camera System Includes pre-installed ThunderCam which allows you to see materials on the laser bed via the software for easy positioning of engravings on strange-shaped objects.
- Operating Modes Optimized raster, vector, or combined modes
- Easy Adjustable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with a new origin
- Motion Control System High-Speed 5-phase stepper motors, up to 2,000mm/s (80"/second) and true 3G acceleration
- Resolution User controlled from 100 to 1000dpi
- Safety Open cover protection, no-water protection, heat alarm system
- Auto Focus Infrared Auto-Focus system to easily bring material into focus
- Belts High-quality fiberglass reinforced neoprene belts
- Water Chiller N/A
- Ventilation 375CFM Exhaust Fan. There is one 4" port on the rear of the machine
- Motorized Table Includes both a removable honeycomb and solid metal blade (knife-style) bed
- Laser Heads 2" Head / Lens included, optional 4" head and HR head
- TL-Timer (Smart Board) Relay switch that controls exhaust and air assist so they stop running when laser is not working
- Warning Light Visible red / green light on machine so you know when job is finished
- Support Free lifetime support
- Shipping in the lower 48 is included in our pricing
- We offer a 2-year factory warranty on our machines.
- All machines can fit through a standard doorway
- Everything you need to run the laser is included, except 2 gallons of distilled water
