Aurora 8 Fiber 60W Mopa JPT Laser Source User Manual
OEM manual for the JPT MOPA 60W laser source used in the Aurora 8 Fiber, covering technical specifications, cut-off frequency, and output waveforms.
Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.
Preface: This is the OEM manual for the LASER SOURCE only, it is not the manual for the machine itself. Notes contained within this manual are from JPT and should be considered when operating your machine.
Screenshots from the manual
Manual TOC
1.5 Technical Specifications
Cut-off Frequency
Output Waveforms
