55 Watt RF (Coherent) Material Library
Suggested laser settings (power, speed, interval, air assist) for common materials using a 55-watt RF (Coherent) laser tube.
Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.
Copying and re-distribution for profit of these library files is forbidden.
| Material | Mode | Thickness (inch/mm) | Power (%) | Speed (mm/s) | Interval (dpi/mm) | Air Assist | |
|---|---|---|---|---|---|---|---|
| Acrylics / 亚力克 | Score | 0.19"/5mm | 1 | 15mm/s | / | / | Low |
| Engraving | 15 | 1000mm/s | 635dpi | 0.04mm | Low | ||
| Cutting | 70 | 6mm/s | / | / | Low | ||
| Copper plate coating / 铜板涂层 | Engraving | 0.53"/13.5mm | 95 | 1000mm/s | 600dpi | 0.04mm | High |
| Anodized alumina / 阳极氧化铝 | Engraving | 0.19"/5mm | 30 | 1500mm/s | 635dpi | 0.04mm | Low |
| Engraving | 0.37"/9.5mm | 60 | 300mm/s | 400dpi | 0.06mm | Low | |
| Tilia board / 椴木板 | Cutting | 0.19"/5mm | 60 | 15mm/s | / | / | Low |
| Cherry board / 樱桃木坂 | Engraving | 0.4"/10mm | 99 | 300mm/s | 400dpi | 0.06mm | High |
| Cutting | 95 | 3mm/s | / | / | Low | ||
| Maple board / 枫木板 | Engraving | 0.4"/10mm | 40 | 100mm/s | 400dpi | 0.06mm | High |
| Cutting | 95 | 3mm/s | / | / | High | ||
| Black walnut board / 黑胡桃木板 | Cutting | 0.08"/2mm | 50 | 95mm/s | 423dpi | 0.06mm | High |
| Double color board (ABS) / 双色板（白底黑面） | Engraving | 0.04"/1mm | 20 | 1500mm/s | 600dpi | 0.04mm | Low |
| Cutting | 60 | 30mm/s | 600dpi | 0.04mm | Low |