PKP544MN18B Motor
This is used as a Y axis motor for the Bolt and Odin series machines. The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise.
This is used as a Y axis motor for the Bolt and Odin series machines.
The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.36º (1000 steps per rev).
Frame Size | 1.65 in |
Motor Length | 1.54 in. |
Basic Step Angle | 0.36º |
Holding Torque | 36 oz-in |
Current per Phase | 1.8 A/phase |
Type | High-Resolution |
Shaft/Gear Type | Round Shaft with Flat (No Gearhead) |
Gear Type | No Gearhead |
Motor Connection Type | Connector |
Shaft | Double |
Output Shaft | Metric |
Output Shaft Diameter | 5 mm |
Step Angle | 0.36 ° |
Connection Type | New Pentagon (Bipolar) |
Lead Wires | 5 |
Rotor Inertia | 0.33 oz-in² |
RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | CE |
Insulation Resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 0.5 kVAC 50/60 Hz |
Temperature Rise | Winding temperature rise 144ºF (80ºC) max. |
Ambient Temperature Range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | 85% or less (Non-condensing) |
Shaft Runout | 0.05 mm (0.002 in.) T.I.R. |
Concentricity | 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
Radial Play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Radial Load | 0 in. from Shaft End = 4.5 lb0.2 in. from Shaft End = 5.6 lb0.39 in. from Shaft End = 7.6 lb0.59 in. from Shaft End = 11.7 lb |
Axial Load | 2.2 lb |
Still stuck?
Fastest response times in the industry from our US-based support team.