Thunder Laser USA Windows Network Configuration and Troubleshooting Tool
Overview of the Windows Network Configuration and Troubleshooting Tool (v1.12) for Thunder Laser machines, including download link and version capabilities.
How to import
- Download the
.clblibrary file above. - In LightBurn, open the Material Library window (Window ▸ Material Library).
- Click the load icon and choose Load an existing library, then select the downloaded
.clbfile. - Assign settings to a layer by double-clicking an entry.
Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.
Preface: This article is an overview of the tool, not geared as a how-to. The tool is built to be a walkthrough with lots of features and functions to make things concise and easier to use.
Overview of the tool, version 1.12
Where to download
Current version will always be uploaded here.
Version Information
Version 1.12
Initial public release.
Capabilities:
- Read the users computer network connection status's and configurations
- Guide user to selecting an IP for the laser machine and network connection
- Set IP on laser machine VIA usb
- Set IP for device profile in Lightburn and Lasermaker
- Diagnostics: Ping and check for RUIDA device, check for Comm ports for USB connection, check for software Inbound Network access
- *Not compatible with Lightburn Bridge or Titan wifi card at this time
Please report bugs to [email protected].