Titan: Critical Spare Part Recommendations for Titan and Titan Pro
This article discusses spare parts needs for your Thunder Laser Titan and Titan PRO machines, verify all part numbers for your existing part. Parts can vary by install location. If your laser is your business and down time is not acceptable while you
This article discusses spare parts needs for your Thunder Laser Titan and Titan PRO machines, verify all part numbers for your existing part. Parts can vary by install location.
If your laser is your business and down time is not acceptable while you wait on part deliveries, then the following are recommended:
For spare parts, be sure to check out the Thunder Laser USA Ecom Website
Titan Optics will not be the same as the Titan PRO optics in all locations due to the Fiber Source. Please pay attention when ordering.
*Working on populating the USA stock for the parts and will update further, 1/19/2025
Part | Link to Buy | Notes |
Titan Beam Combiner | 1 Per Machine, in back near tube exit | |
Titan Mirrors 1,2 and 3 | 3 Per Machine | |
Titan Pro Mirror | ||
Titan Pro Stock 3" Lens (Fiber and CO2) | ||
| Titan Stock 2.5" Lens | Other Lens are available like 4", 1.5", 2" and 2.5" | |
X and Y Servo | ||
X and Y Motor Drivers | (Must be configured by the user for their specific to your driver/machine) | |
| X and Y Endstop Switch | 2 Locations per machine | |
Z Lower Limit Switch | 1 Per Machine | |
| Linear Bearing for X Axis 27 and 35 | ||
Linear Bearing for X Axis on 51 | ||
RF Laser Power Supply 60 Watt | 1 Per machine, confirm your power supply size | |
RF Laser Power Supply 100 Watt | 1 Per Machine, confirm your power supply size | |
Fiber Source Power Supply | 1 Per Machine, confirm your power supply size | |
Titan Small X Belt |