General · Resource

Update the firmware of the WIFI Card

Step-by-step instructions for reflashing the WIFI card firmware on Thunder Laser machines, including required tools and a walkthrough video.

Firmware File, Driver and Flash Program.clb · Import into LightBurn

How to import

Download the .clb library file above.
In LightBurn, open the Material Library window (Window ▸ Material Library).
Click the load icon and choose Load an existing library, then select the downloaded .clb file.
Assign settings to a layer by double-clicking an entry.

Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.

Preface: This article covers the steps to reflash the WIFI card.

You will need:

Windows Computer with 5GB of free space, familiarity with Device Manager
Winrar
2.5mm Allen wrench
Small Flathead
USB 3.0 Printer Cable
Firmware File, Driver and Flash Program

After you are done with the reflash, change your USB and LAN IP to a different address and then set them back to what they were so that the IP gets written to the new WIFI firmware.