Industrial marking for gunsmiths and licensed manufacturers

Permanent serial and part marking. In your own shop.

Deep, permanent serial numbers, part numbers, and logos on steel, stainless, aluminum, and titanium, plus clean imaging on Cerakote and coated finishes. A compact, enclosed laser puts the mark in the same spot every time, from your own files, so the work stays in your building and on your schedule.

Most shops start with the Aurora Lite fiber at $4,795, or the Aurora 8-100W MOPA at $11,000 for Cerakote and faster, deeper marks.

US-based support and over 1,000 five-star reviews on Trustpilot.

Not ready for a call? Email us what you mark and how many, and we will send a written machine recommendation.

The bottleneck

The mark is the one job you keep sending down the road.

Serial numbers, part numbers, a clean maker’s mark, a shop logo, and the work leaves the building. You wait on a marking shop’s queue, you pay their per-piece price, and you hand over finished parts you already put hours into and hope they come back right. The workarounds are worse. Hand stamping walks and looks amateur next to a factory mark. A rotary engraver is slow and can wander. The bargain import galvo shows up open-frame with software nobody can run and a safety question you do not want in your shop. A compact, enclosed laser on your own bench closes all of it: metal serials and part marks, Cerakote imaging, and logos, in-house, when you want them done.

One bench brings the marking, the schedule, and the margin back under your own roof.

Bring the marking and engraving in-house and the math changes fast. You stop paying a vendor’s per-piece price, you stop waiting on someone else’s queue, and you keep the money that used to leave the building on every job. It also lets you say yes to work you used to turn down: the serialized run, the shop logo, the custom one-off, because the capability now lives on your own bench. For a lot of shops this one machine is the difference between quoting a job and winning it.

✓

Factory-clean metal marks

Deep, permanent serials, part numbers, and logos on steel, stainless, aluminum, and titanium. The mark is in the metal, not on it, so it does not wear off, wipe off, or fade, and it reads the same on every piece.

◉

Cerakote and coated-finish imaging

The MOPA lifts a crisp image out of Cerakote and other coated finishes without cutting through to bare metal, for shop logos, patterns, and fine detail on a coated part. Placed by camera from your own files, so it lands in the same spot every time.

⇅

Repeatable placement, every piece

A simple fixture and your own file put the mark in the same spot on piece one and piece one hundred. Load the file, set the part, run it. A design change is a file edit, not a purchase order and a week of waiting.

Materials

Steel, aluminum, titanium, and coated finishes. One lineup covers the shop.

Steel, stainless, aluminum, and titanium are what a firearms shop marks most: serials and maker’s marks on metal parts, logos on magazines and scope tubes, and small components. The fiber and MOPA put real depth into all of them. Cerakote and coated finishes image cleanest on the MOPA, anodized aluminum marks cleaner on the MOPA, and polymer grips take a clean surface mark on the UV.

Stainless steelAluminumTitaniumCerakote and coated finishesAnodized aluminumCarbon and tool steelMagazinesScope tubesPolymer gripsWood gripsG10

Not sure how your steel or your Cerakote will take the mark? That is what the free sample is for. Send a few pieces of your real material, a blank of the same stock and coating, and we will run them and tell you straight whether it is a good fit.

A few materials we will not run, for real safety reasons.

No PVC or vinylNo ABSNo polycarbonateNo unknown polymer or coating

PVC and vinyl release hydrogen chloride under a laser, which is toxic to people and corrosive to the machine, and ABS releases hydrogen cyanide. Both are a hard no. Polycarbonate browns and does not finish clean. A lot of aftermarket polymer and coating is not labeled, so if you cannot name what a frame or a grip is made of, the answer is no until you can. We will always tell you the truth about a material instead of selling you a result we cannot stand behind.

Free guide · PDF

The marking rules in plain English, and the machine that meets them.

What the rules require without the legalese, which finishes mark clean, and how fiber, MOPA, UV and CO2 divide the work.

Get the firearms guide

No cost, and no sales call required to read it.

What gets built

Serials, maker’s marks, and custom engraving that hold up.

Deep, permanent serials and maker’s marks, custom engraving on metal, and shop logos imaged clean into Cerakote. The required marks and the work that builds your name, all on your own bench.

Aurora Lite or MOPA

Two metal machines. Here is how to choose.

Both are enclosed fiber lasers that run on a standard 110v outlet and put real depth into metal. The difference is speed, Cerakote, and how much the machine does for you.

Aurora Lite (50W fiber)Aurora 8-100W MOPA
Price$4,795$11,000
Power50W100W
Time to a deep engraveBaselineOften about half the passes
Serials on bare metalYes, with real depthYes, deeper and faster
Cerakote and coated finishesWorks, with less controlThe cleanest imaging in the line
Anodized aluminumMarks itCleaner, crisper marks
Camera and autofocusNoYes
Color on stainless and titaniumNoYes, takes skill to dial in
Best forSerials and logos on bare metal, the best value in fiberCerakote work, higher volume, and shops that want the camera

Why wattage matters for depth. You can start on the Aurora Lite, but it is 50W. More wattage means fewer passes to reach depth. On a typical deep serial in steel, the 100W MOPA often needs about half the passes of the 50W Lite. Your exact result depends on the metal, the finish, and the depth you need, which is exactly what the free sample shows. If deep marks are most of your work, that time adds up fast.

Mostly bare-metal serials and logos? The Aurora Lite covers it. Doing a lot of Cerakote, or marking enough parts that speed matters? Go MOPA. Still not sure? Send us a piece of your material and we will run it on the machine we think fits, then tell you straight.

The machine

Three machines, one honest recommendation.

Metal marking goes to the Aurora line. Non-metal cutting and engraving goes to the Nova Plus. Most shops start with one Aurora and add a second machine only when the work calls for it.

Where most shops start

Aurora Lite

The 50W fiber for metal. Deep, permanent serials, part numbers, and logos on steel, stainless, aluminum, and titanium. The best value in fiber, enclosed, and runs on a standard 110v outlet.

Starting at $4,795
View Aurora Lite →
For Cerakote and volume

Aurora 8-100W MOPA

Everything the Lite does, deeper and faster, plus the cleanest Cerakote and coated-finish imaging in the line, cleaner anodized marks, a camera, and autofocus.

Starting at $11,000
View Aurora MOPA →
For the non-metal side

Nova Plus

The CO2 machine for wood, G10, leather, acrylic, and signage. It cuts and engraves the non-metal work a fiber laser cannot touch. Add it when that side of the shop grows.

Starting at $8,350
View Nova Plus 24 →

The Aurora and Nova Plus run on a standard 110v outlet. Every machine ships nationwide on a liftgate truck with the LightBurn software included (licensed for two computers, the computer is yours), one free hour of remote training, US-based support, and a 2 year machine warranty. For surface marks on polymer housings, the Aurora 8-5W UV ($10,600) is the plastics tool, and the Thunder Air 700 handles fume in-house with no outside duct. Not sure which your work needs? Request a free sample and we will tell you straight.

Why firearms shops choose Thunder Laser

Straight prices, honest advice, and marks you can stand behind.

$

We publish our prices

You have already noticed the industrial marking tier will not tell you what anything costs until a rep has your number. Our prices are on the page. What you see is what the machine costs, and the sample that proves it fits is free.

◆

We tell you which tool your job needs

Bare-metal serials want the fiber or MOPA, Cerakote imaging wants the MOPA, polymer wants the UV, and wood and G10 want the CO2. Sometimes the honest answer is the cheaper machine. A vendor who only ever recommends his top-shelf model is not advising you.

☑

Marks that hold up and repeat

Permanent, legible marks placed by camera from your own files, so a run of serials or logos comes out the same on every piece. You stay responsible for meeting the rules that apply to your operation; we help you dial the mark in on your own material. Backed by US-based support and a 2 year machine warranty.

The team behind the machine

You are not just buying a laser. You are buying the people behind it.

★★★★★Over 1,000 five-star reviews on Trustpilot

US support, coast to coast, from people who actually run these machines.

When you bet a production step on a machine, the real question is not just whether it marks clean. It is whether the company behind it will be there after the sale. With Thunder Laser that is a real US-based team that knows these machines inside out, not a reseller who has never run one.

More than a thousand owners have said exactly that in five-star reviews. You start with one free hour of remote training, every machine carries a 2 year warranty, and you get straight answers, including when the answer is no. Buy the machine, and you are buying the shop that stands behind it.

★★★★★
1,000+
Five-star reviews on Trustpilot
Coast to coast
US support, real people who know the machine
2-yr
Machine warranty on every machine
$0
Mail us your own material and we mark it free, then send it back with the settings, so you see it work before you buy.
The offer

See it run on a piece of your own material. Free.

No spec sheet tells you how your steel or your Cerakote takes the mark. So we will just show you. This is a free sample to show what the machine can do, its quality and its detail. It is not a production run, and we do not take in finished goods, mark serial numbers for you, or fill orders.

1

Tell us your material

On the short form, tell us your material and the simple mark or cut you want to see, within reason, so we can confirm it is a good fit before we run it.

2

Mail us a few pieces

Send a few pieces of your actual material to our shop. We will send the address. A blank of the same stock and coating, an offcut, or raw stock, a piece of your material, never a firearm or a finished part.

3

We run it and send it back

You get your sample back with the exact settings we used, so you can judge it against your own standard on your own bench. No cost, no pressure.

Send a few pieces, not just one. We do not know the perfect settings for every steel and coating on sight, so a few pieces give us room to dial it in and show the best the machine can really do.

Only send material you are okay with us using up. Samples are for testing, so treat anything you send as something we may consume getting the settings right. Send a blank of the same stock and coating, never a firearm or a finished part.

Straight answers

Firearms questions, answered straight.

What about serialization depth and ATF requirements?
We make lasers; we do not make firearms and we do not tell you how to run your books. The depth, size, and format of a required mark, and every ATF rule that applies to your operation, are your responsibility to meet, and you stay responsible for them. What the machine does is put down deep, permanent, legible marks, repeatably, from your own files. We are glad to help you dial a mark in on a piece of your own material so you can judge it against the standard you have to hit. We do not offer compliance guarantees, and we do not serialize parts for you.
Can it image Cerakote and coated finishes?
Yes, and this is where the MOPA earns its keep. It lifts a crisp image out of Cerakote and other coated finishes, a shop logo, a pattern, fine detail, without cutting down to bare metal, so the coated surface stays intact around the mark. How clean it comes out depends on the specific coating, its color, and how it was applied, so the honest move is to send a coated blank and let us prove it before you commit.
Can I mark polymer and plastic parts?
Yes, on the Aurora 8-5W UV, which is a surface-marking tool. It puts a clean surface mark on polymer housings and other plastics without the heat distortion you get trying to force a metal laser onto plastic. It is a surface mark, not depth, and it is not a cutter. If you cannot name what a part is made of, we will not run it until you can, because unknown polymer can put dangerous fume in the air.
What metals and finishes will it mark?
Stainless, aluminum, and titanium mark clean on the fiber or MOPA for serials, part numbers, and logos, and anodized aluminum marks cleanly on the MOPA. Cerakote and coated finishes image on the MOPA. Bare metal takes real depth from the fiber or MOPA; the CO2 can only surface-mark bare metal with a marking spray, so metal depth always goes to the Aurora line. Not sure how your exact steel or coating behaves? Send a piece and we will show you.
Do I need more than one machine?
No. Most shops start with the one that matches their bread-and-butter work. If that is metal serials and logos, start with the Aurora Lite. If it is Cerakote imaging or higher volume, start with the MOPA. If your work leans to wood, G10, and signage, the Nova Plus is the place to start. Tell us what you make and we will point you at the one machine that earns its keep first, not the biggest invoice.
What power and space do I need, and can I finance it?
The Aurora and Nova Plus run on a standard 110v outlet and fit a normal bench or floor footprint. You will want fume extraction, and our Thunder Air 700 handles that in-house with no outside duct. Lead times vary and we often have machines in stock. Many shops finance through Geneva Capital, and there is a small discount for paying in full by check or bank transfer. Every machine ships nationwide on a liftgate truck with US-based support and one free hour of remote training.
Request a free sample

Send us a piece of your material. We will run it free.

Fill out the short form and a real person from our team follows up. No pressure, no spam, just a clean mark on a piece of your own material and straight answers. A blank of the same stock and coating, an offcut, or raw stock only, never a firearm or a finished part.

Prefer to talk it through first? Schedule a sales call.

Not ready to send a sample? Take the guide instead.

Download the guide
Schedule a sales call
Scroll to Top
Thunder laser usa Team

We’re here to make the answers easy. Connect with a Laser Expert on all your questions.