Nova 24

$ 6,600.00

as low as $88/mo

The desktop Nova 24 laser engraver is an outstanding tool for basic makers to start cutting, marking and engraving a wide variety of projects. It features a 60 Watt tube and has the same components, design, and build quality as the rest of the Nova series machines.

Questions? Call (903) 522-4070

I have been using my Thunder Laser 60 Watt desktop for close to one year. So far is has performed perfectly. Over the years, I have owned several metal working and wood working machinery made in China, and for the most part they do a pretty good job however, the quality is still not comparable to machinery made in Europe or the US however. This is not the case with Thunder Laser. This machine was designed and made with quality in mind, and it shows in the way it looks, feels, and performs. I have been involved in wood working and metal working for thirty years. My Thunder Laser Cutter/Engraver has been the most enjoyable, and rewarding machine of all. I have been able to make projects with incredible precision. The final details of the objects I now make are amazing. This machine will not disappoint you.

  • Ed Hubard Purchased a Nova 24

Get a better look at a Thunder Laser

Check out this review from one of our customers to go over some of the main features and highlights of a Thunder Laser.

Thunder Laser Customer Support

US-Based Support and Service

We aren't just selling you a machine, but entering a long-term relationship. We stand behind our products 100%

thunder laser thundercam

ThunderCam System

Optional camera system to visually render the laser bed in the software

thunder laser motors

Hybrid-Servo Motors

Our LeadShine HBS57 Closed-Loop stepper motors are capable of engraving speeds up to 39" per second

thunder laser pass-through doors

Pass-Through Doors

Allowing you to work with pieces large than the size of the bed

thunder laser alarm lamp

Alarm Lamp

Visually alerted when the job is finished running

Thunder Laser Smart Board

Smart Board

Turns the exhaust system on and off automatically so you are not wasting precious HVAC

  • Water Chiller
  • Air Assist
  • Exhaust
  • 2" Head
  • LightBurn
  • Tool Kit
  • Cleaning Kit
  • Honeycomb / Knife Bed
  • Pass-through Doors
  • Alarm Lamp
  • Smart Board
  • Red Dot Pointer
  • Auto Focus
  • Engraving / Working Area 23.6" x 15.7" x 6.1"
  • Max Part Size Pass through closed: 27.6" x 20.9" x 8.3"
    Pass through open: 27.6" x ∞" x .4"
  • Laser Wattage 60w
  • Intelligent Memory Capacity Multiple File Storage up to 128MB
  • Laser Source Sealed CO2 Glass Tube, stringintly tested to pass Quality Control. Average lifespan is 2000-4000 working hours. Replacement cost $300 (60w)
  • Electrical Requirements Standard 110v AC 60Hz Single Phase, dedicated 15A circuit
  • Air Assist Air pump 5-7psi included
  • Machine Size 57.1" x 31.9" x 26"
  • Software LightBurn Software included for two computers, easily import any graphics file. Compatible with Windows, Mac, and Linux
  • Training One hour remote setup training included, optional four hour training available
  • Red Dot Pointer Shows where laser will fire, allows for "dry run", allows for easy positioning on material
  • Camera System Optional ThunderCam allows you to see materials on the laser bed via the software for easy positioning of engravings on strange-shaped objects.
  • Operating Modes Optimized raster, vector, or combined modes
  • Easy Adjustable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with a new origin
  • Motion Control System LeadShine Hybrid-Servo Motors with engraving speeds up to 1,000mm/s (39"/second)
  • Resolution Up to 500dpi with included 2" head or 800dpi with HR head
  • Safety Open cover protection, no-water protection, heat alarm system
  • Auto Focus Infrared Auto-Focus system to easily bring material into focus
  • Belts High-quality fiberglass reinforced neoprene belts
  • Water Chiller CW5000
  • Ventilation 375CFM Exhaust Fan. There is one 6" port on the rear of the machine
  • Motorized Table Includes both a removable honeycomb and solid metal blade (knife-style) bed
  • Laser Heads 2" Head / Lens included, optional 4" head and HR head
  • TL-Timer (Smart Board) Relay switch that controls exhaust and air assist so they stop running when laser is not working
  • Warning Light Visible red / green light on machine so you know when job is finished
  • Support Free lifetime support
  • Shipping in the lower 48 is included in our pricing
  • We offer a 2-year factory warranty on our machines.
  • All machines can fit through a standard doorway
  • Everything you need to run the laser is included, except 2 gallons of distilled water

Products Made with Thunder Laser

Below are just a few examples of products that have been made with Thunder Laser machines.
  • thunder laser 3d engraving