3DM580 Driver
Overview of the 3DM580 stepper motor driver, including features and electrical specifications for Thunder Laser machine owners.
Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.
Features
- Extra-low motor noise offers excellent quietness
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Self-test and Auto-configuration technology, offers optimum responses with different motors
- Microstep resolutions programmable, from full-step to 10,000 steps/rev
- Operating voltage up to +50 VDC
- Output current programmable, from 2.5A to 8A
- Pulse input frequency up to 500 KHz
- Automatic idle-current reduction
- Supports PUL/DIR and CW/CCW modes
Specification
- Current: Min 2.5A, Max 8A (peak current) - 15 settings
- Voltage: Min 18V, Typical 36V, Max 50V DC
- Logic current: Min 7mA, Typical 10mA, Max 16mA
- Input frequency: 0 to 500KHz
- Size: 118mm x 76mm x 34mm (4.7" x 3" x 1.4")