573S20 Motor
Quick
answer
answer
Features: 3 phase 1.2° stepping angle Standard NEMA 23 dimensions Holding toque of 1.5 Nm (212 oz-in) High precision Smooth movement Low motor heating Low movement noise Specification: Step angle: 1.2 deg Step per revolution: 300 Phases: 3 No. wires:
Applies toAll machinesTopicGeneral
Features:
- 3 phase 1.2° stepping angle
- Standard NEMA 23 dimensions
- Holding toque of 1.5 Nm (212 oz-in)
- High precision
- Smooth movement
- Low motor heating
- Low movement noise
Specification:
- Step angle: 1.2 deg
- Step per revolution: 300
- Phases: 3
- No. wires: 3
- Length of wire: 6ft
- Current: 5.8A
- Holding Torque: 1.5 N*M (212oz-in)
- Single shaft (dia./length): 8.0mm/19mm
- Inductance: 1.35 mH
- Phase resistance: 0.9 ohms
- Detent torque: 480 g.cm2
- Rotor Inertia: 480 g-cm
- Weight: 1.1KG (2.5lb)
- Overall dimension (LxWxD):81mm x 57mmx57mm
Still stuck?
No bots, no runaround. Talk to a U.S.-based laser tech who knows your machine inside out.