Category
Material Sample Tests
17 articlesLegacy Lightburn Material Test FileOverview of pre-made material test cards and the built-in LightBurn Material Test Generator for CO2 lasers…Marking Compounds & InksOverview of laser marking compound and ink brands compatible with Thunder Laser machines, including…3D Relief Engraving on AcrylicHere is a 3D Relief engraving workflow on acrylic. This is the same file we used on the wood 3d relief…3D Relief Engraving On Natural WoodA video series covering the full progression of 3D relief engraving on natural wood, including settings,…Mask and Multi-Color Fill ProjectStep-by-step guide to creating a multi-color fill laser engraving project using masking tape, airbrush…Rubber Stamp Sample Test 1A client with a Nova 24-60 is needing to fine tune his settings for rubber stamps. These tests are performed…Safran Material TestTesting Marking Compounds on a Nova 35-80We have a discount code for Brilliance. Use code THUNDER to get 10% offRay Artemus Wood & Acrylic Sample TestOriginal demo sample with no reverse compensation settings active (Thunder Laser Scanning Offset Adjustment):…Dialing In Images On Acrylics - Case StudyA real client case study on engraving grayscale-shaded logos on clear acrylic, with settings and image prep…Rubber Stamp Graphic Setup Issue 2A walkthrough of a client rubber stamp file setup in LightBurn, with the original and fixed files attached…426 - Setting Comp TestSAMPLE 4825Evaluation of ABS and HDPE materials on a Thunder Laser USA CO2 laser, examining safety data and byproducts…JDS Sample Pack example Lightburn Project FilesDownload LightBurn project files for JDS Sample Packs, organized by Thunder Laser machine model, with example…410 - Prepping Artwork (File Specific)All files are attached:Leather Patch Sample Full WorkflowOdin 32-60 Test 27A side-by-side comparison of raster engraving on an Odin 32-60 at 2,000 mm/sec vs. 1,000 mm/sec, exploring…