Constant Mode Temperature Set Point on CW-5XXX Chillers
Applies toAll machinesTopicGeneral
Under constant temperature mode, you can manually adjust the temperature of S&A water chiller.
You can find how to choose constant temp mode here: Selecting Intelligent or Constant Mode on CW-5000 Series Chillers
For example, to set the water temperature at 20℃
1. Press and keep holding ▲and SET buttons
2. Then for 5 seconds and it displays "0"
3. Press ▲ key to switch to "8" and release the key
4. Press "SET" key, and it displays "F0"
5. Press "SET" key again
6. Press▼ to adjust to "20"
7. Press "RST" key to save the modification
Here is the chiller manual: S&W CW-5000 Series Chiller User Manual
Here is a video of setting the temperature:
If indicator D1 is ON, then you are not in constant setpoint mode and the temp setting described here will be ignored
Still stuck?
Fastest response times in the industry from our US-based support team.