Critical Spare Part Recommendations for NOVA and Nova Plus series machines
Recommended critical spare parts for Thunder Laser Nova and Nova Plus machine series, with links to purchase and notes on quantities and compatibility.
This article discusses spare parts needs for your Thunder Laser Nova and Nova Plus machine series, verify all part numbers for your existing part.
If your laser is your business and down time is not acceptable while you wait on part deliveries, then the following are recommended:
For spare parts, be sure to check out the Thunder Laser USA Ecom Website
| Part | Link to Buy | Notes |
|---|---|---|
| Nova 24 Beam Combiner | 20 mm Beam Combiner | 1 Per Machine, in back near tube exit |
| Nova 35,51, 63 Beam Combiner | 25 mm Beam Combiner | 1 Per Machine, in back near tube exit |
| Nova Series Mirrors | 25 mm Mirrors | 3 Per machine |
| Nova Series Stock 2" Lens | 2" Focal, 20mm Diameter Lens | Other Lens are available like 4" and HR Top and Bottom |
| Nova Plus Stock 2.5" Lens | 2.5" Focal Lens, 20mm Diameter | |
| Glass Tube Laser Power Supply | Power Supplies | Pick the LPSU Wattage based off your specific machine |
| X and Y Motor | Motor | |
| X and Y Motor Drivers | Driver 1 Driver 2 | Pick the motor driver that matches your existing |
| X and Y Endstop Switch | X and Y Endstop | 2 Locations per machine |
| Z Lower Limit Switch | Z Limit Switch | (Nova 1, Nova Plus 2 per machine) |
| Auto-Focus Sensor | Nozzle Tip Focus Sensor | For Nova Plus Only |
| Roller Bearings | Roller Bearing and Bolt | 16 Per Machine |
| Glass Laser Tube | Laser Tubes | Pick the appropriate Tube based off your machine. Only recommend if tube is near End of Life |
| RF Laser Tube | Not recommended to have a spare. | |
| RF Laser Power Supply 60 Watt | 1000w DC Power Supply | 1 Per machine, confirm your power supply size |
| RF Laser Power Supply 80 Watt | 1500w DC Power Supply | 1 Per Machine, confirm your power supply size |