General · Resource

ODIN 32 55w Coherent Material Libraries

This article and library are PRELIMINARY and still under development. *This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The precompiled

here.clb · Import into LightBurn

How to import

Download the .clb library file above.
In LightBurn, open the Material Library window (Window ▸ Material Library).
Click the load icon and choose Load an existing library, then select the downloaded .clb file.
Assign settings to a layer by double-clicking an entry.

Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.

This article and library are PRELIMINARY and still under development.

*This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary.

The precompiled LightBurn library file can be downloaded here.

The LightBurn file may differ from the original document.

Here is short tutorial on how to upload the clb file into LightBurn:Uploading the LightBurn Materials Library