Updating The Firmware - DO NOT DO THIS UNLESS INSTRUCTED
Instructions for updating Thunder Laser firmware — do not perform unless directed by Thunder Laser USA support; covers Nova, Bolt, and Odin series machines.
Provided as-is for Thunder Laser USA customers. Always run a test cut on scrap first — settings vary by material and machine. Please do not redistribute.
DO NOT DO THIS on a Thunder Laser USA Machine UNLESS INSTRUCTED to do so by Thunder Laser USA support. If you suspect a controller error or issue, try this first: Resetting The DSP To Default Parameters, then contact [email protected].
Thunder Laser uses a custom firmware image for its machines and there are different versions for the different machines series (Nova, Bolt, and Odin).
We do not publish our firmware. Please contact support for more information.
For Bolt Users (With the Gt5 Screen): How to Flash Screen (HMI) and Controller (DSP) Firmware on a Thunder Bolt Laser using the Screen and USB
Download RdWorks here: RD Works For Thunder Laser
You need to see this before performing a firmware upgrade or controller swap: Replacing the DSP Controller
Here are the detailed instructions:
