Nova and Nova Plus Series Belts
Preface: This article covers Nova Series Belts for the Z, Y and Z axes. How to read a Belt Part Number: (Note that Length may be omitted when buying bulk or when searching for bulk length belt) Mini 60 Nova (Plus) 24 Nova (Plus) 35 Nova (Plus) 51…
Preface: This article covers Nova Series Belts for the Z, Y and Z axes.
How to read a Belt Part Number:
(Note that Length may be omitted when buying bulk or when searching for bulk length belt)
Location | Length/Part Number | Qty |
|---|---|---|
X Axis | 1 | |
| Y Axis (Left and Right) | 2 | |
X Motor | 1 | |
Y Motor (2:1) | 1* |
Location | Length/Part Number | Qty |
|---|---|---|
X Axis | 1 | |
| Y Axis (Left and Right) | 2 | |
X Motor | 1 | |
Y Motor (2:1)* | 1* | |
Y Motor (3:1)* | 1* | |
Z axis (Single) | 1 | |
Z axis (Dual) | 1 |
*For Y Motor belt, you will need to check your existing part number. The gear configuration was changed in 2020.
Location | Length/Part Number | Qty |
|---|---|---|
X Axis | 1 | |
| Y Axis (Left and Right) | 2 | |
X Motor | 1 | |
Y Motor (2:1)* | 1* | |
Y Motor (3:1)* | 1* | |
Z axis (Single) | 1 | |
Z axis (Dual) | 2388mm Loop | 2 |
*For Y Motor belt, you will need to check your existing part number. The gear configuration was changed in 2020.
Location | Length/Part Number | Qty |
|---|---|---|
X Axis | 1 | |
| Y Axis (Left and Right) | 2 | |
X Motor | 1 | |
Y Motor (2:1)* | 1* | |
Y Motor (3:1)* | 1* | |
Z axis (Single) | 1 | |
Z axis (Dual) | 3000mm Loop | 2 |
*For Y Motor belt, you will need to check your existing part number. The gear configuration was changed in 2020.
Location | Length/Part Number | Qty |
|---|---|---|
X Axis | 1 | |
| Y Axis (Left and Right) | 2 | |
X Motor | 1 | |
Y Motor (2:1)* | 1* | |
Y Motor (3:1)* | 1* | |
Z axis (Single) | 1 | |
Z axis (Dual) | 3300mm Loop | 2 |
*For Y Motor belt, you will need to check your existing part number. The gear configuration was changed in 2020.
Belt Tension Measurements:
How to measure the tension of the X-axis belt and Y-axis left and right belts:
Before measuring the belt tension, power off your machine please push the Laser Head to the far left position of the guide rail when testing the X belt, and push the gantry rail to the back of the machine.
Test tool: Electronic dynamometer
How to measure the tension of the Z-axis belt:
Please power off the machine before inspection, make sure the platform won't slide downward when you press the platform by your hand
Test tool: Electronic Dynamometer
Nova24 model: As the belt is blocked by the cover, it can not be tested and its adjustment issubject to actual experience, refer to the belt tightness of the larger machines;Nova35: 11.5N ±1Nova51: 11.5N ±1Nova63: 10.5~12.5N;