TI
Maintenance
Titan
Every Maintenance article for the Titan.
8 articlesThunder Laser External Air Compressor Guidelines and InstallPreface: This article describes adding 3rd party bolt-on performance peripherals. Your stock Thunder Laser…Using Laser 2 Output To Test For Possible Laser 1 Output AnomalyStep-by-step procedure for using the Channel 2 output in place of the Channel 1 output on your Thunder Laser…Titan: How to tram your honeycomb bed to the laser headStep-by-step instructions for vertically adjusting the honeycomb bed on the Titan series laser to tram it to…Titan Series BeltsPreface: This article covers Titan Series Belts for the Z, Y and Z axes. How to read a Belt Part Number:…How to Clean and Maintain Your Head-Mounted Autofocus SensorTitan: How to Replace X or Y axis Servo Motor DriversStep-by-step guide for Titan series machines covering how to uninstall, reinstall, and swap X-axis and Y-axis…How to upgrade the TiTan Pro firmware to support modifying the parameter of the Y driverStep-by-step guide to upgrading the TiTan Pro hardware and firmware to support modifying the Y-axis driver…Double Lines and Nozzle Clipping: How Beam Alignment and Lens Choice InteractExplains how beam alignment errors and lens choice can cause nozzle clipping, double lines, and angled kerfs.
Back to all Maintenance articles