X, Y and Z Honeycomb Axes will not move when Roller Rotary is plugged in and Rotary will not Spin
Explains how swapped Brown and Black power wires on the Roller Rotary connector pull down the 36V supply, preventing X, Y, Z, and rotary motion.
This article describes the situation where when the Roller Rotary is plugged in, the X, Y and Z (Honeycomb) Axes will not move and the rotary will not spin.
Other Articles of interest:
Thunder 7 Pin XLR Rotary Port
Rotary Axis no motion troubleshooting
Still stuck?
No bots, no runaround. Talk to a U.S.-based laser tech who knows your machine inside out.