NV
Troubleshooting
Nova
Every Troubleshooting article for the Nova.
13 articlesNova Laser Tube Will Not Fire or is Low on Power- LPSU TestLearn how to perform the "Red Button Test" on Nova series laser machines to isolate and diagnose LPSU or…Thunder Laser Nova Laser Power Supply (LPSU) Output Current Test ProcedurePreface: This is a diagnostic procedure to collect data on the output of the LPSU. It is not necessary to…How To Replace The Nova Series DC TubesStep-by-step guide for swapping the laser tube on Nova series machines, covering wire disconnection, tube…Nova Series Laser Won't Turn On - No PowerTroubleshooting guide for Nova Series CO2 laser machines that will not power on, covering emergency stop,…Z Axis Honeycomb Bed will not Raise or GO UP or only Goes Down until it reached the bottomTroubleshooting steps for the Z Axis Honeycomb not raising up, including sensor checks, driver faults,…Nova Series Y Axis Motion FailurePreface: This article will cover reasons why your Y axis will not move front to back. There can be several…Nova Series X Axis Motion FailurePreface: This article will cover reasons why your X axis will not move left or right. There can be several…Nova DC Laser Tube Pulse Anomaly - Pulse has a Ring and a Dot and looks like a HaloTroubleshooting guide for Nova laser pulse anomalies showing a halo ring around the pulse dot, including…Nova Series: Testing Z Axis Endstops and AutoFocus EyesStep-by-step checks for the Z axis upper (AutoFocus) and lower (mechanical) endstops on Thunder Laser Nova…NOVA Main Breaker Tripped Troubleshooting StepsStep-by-step guide to diagnose why the main breaker tripped on a Nova laser, covering pre-checks and…NOVA series 120V Power testing with a multimeter for when a machine "will not turn on"How to trace 120V power in a Nova laser machine using a multimeter to determine what is not powering on and…Seven Red Flashing LED Lights on X or Y Driver on a Nova Series Laser and Laser Won't MoveTroubleshoot seven red LED flashes on the X or Y driver of a Nova series laser, covering endstops, cabling,…Thunder Laser Nova Series Chiller will not power on - Troubleshooting GuidePreface: This article covers some of the reasons and checks for when your CW5000 or CW5200 chiller will not…
Back to all Troubleshooting articles