Thunder CO2 Galvo
Unbox and set up the Thunder CO2 Galvo, then run real jobs: full wrap tumblers, layered acrylic and multi-material work in LightBurn.
First Steps
Start here. From the box to your first engraving, then set up for tumblers.
17:39Unboxing to First Engraving in 30 Minutes
Open the box, assemble the seven main parts and run your first engraving, all in about 30 minutes.
26:06Setting Up for Tumbler Engraving
The five checks that turn a blank tumbler into a sellable product: center, direction, scale, roundness and focus.
Projects
Real jobs start to finish, with the settings and run times.
34:32Full Wrap Tumbler in Under 10 Minutes
A full wrap on a 20oz tumbler, start to finish, in under 10 minutes.
45:31Dual and Tri Layer Acrylic
Dual and tri layer acrylic: focus, settings, run times and how the finish holds up.
518:34Leather, Wood and Acrylic in One Job
Set up one LightBurn file that engraves leather, wood and acrylic in a single job.
Talk to a real tech.
Real techs in the US, coast to coast, with a typical response under 10 minutes.
